本產品按gb12706《額定電壓35v及以下銅芯、濾芯塑料絕緣電纜》標準生產，同時還可根據用戶需要按電工委員會推薦標準iec、英國標準、德國標準及美國標準生產。
the product is manufactured according to the standard of《gb12706 or iec、bs、din and icea upon request.
適用范圍applications
本產品適用于工頻額定電壓3.6/6kv～26/35kv輸配電線路作配送電能子用。
the product is suitable for use in power transmission and distribution lines with rated power frequency voltage 3.6/6kv～26/35kv.
使用特性operating characteristics
· 工頻額定電壓u0/u為3.6/6kv～26/35kv。
rated power-frepuency voltage u0/u: 3.6/6kv～26/35kv.
· 電纜導體的許工作溫度：90℃。
max.admissible operating temperature of 溫度不超過2500c。
max. short-circurt temperature of conductor shall not exceed 2500c.
(5s maximum duration)
· 電纜敷設時環境溫度應不低于00c。
the ambient temperature under installation should not below 00c.
· 電纜彎曲半徑：三芯電纜不小于電纜外徑15倍；單芯電纜不小于電纜外徑20倍。
the bending radius of a single-core cable should not less than 20 times of the cable diameter.
the bending radius of a single-core cable should not less than 15 times of the cable diameter.
電纜額定電壓的選擇 voltage designation
· 電纜的額定電壓應適合于電纜系統的運行狀況，用u0/u（um）kv表示。
u0－電纜設計用的導體對地或金屬屏蔽之間的額定工頻電壓；
u－電纜設計用的導體間的額定工頻電壓；
um－設備可承受的“ 系統電壓”的大值。
the rated voltage of the cable for a given applixation shall be suitable for the operating conditions
in the system in which the cable is used,and is expressed in the form of u0/u（um）kv
where:
u0－the rated power-frequency voltage between conductors and earth metallic screen ,for which the cable designed;
u － the rated power-frequency voltage between conductos, for which the cable designed;
um－ the maximum value of the“highest system voltage”for which the equipment may beused.